<em id="3avjw"><acronym id="3avjw"><blockquote id="3avjw"></blockquote></acronym></em>

  1. HOME > NEWS > Product dynamic > Muddy bending testing machine (asphalt asphalt test instrument) overview and tec

    Muddy bending testing machine (asphalt asphalt test instrument) overview and tec

    2016-03-08 17:17:47   
    Muddy bending testing machine (asphalt asphalt test instrument overview)
    The body is suitable for determination of hot mix asphalt with muddy material mechanical properties of damaged bending in the designated temperature and loading speed. The test temperature and loading rate should be specified when acceptance differences. When evaluating the asphalt material tensile function muddy, acceptance test temperature -10 - 0.5 Deg. C, loading rate should be 50mm/min. Ontology is suitable for wheel crushed molding and cutting length of 250mm + 2.0mm, width of 30mm + 2.0mm, 35mm high + 2.0mm prism beam, the span is 200mm 0.5mm. If Nabie size of the should be specified. The test temperature and loading rate on the relevant regulations and the need to use, without any special designation, acceptance test temperature of 15 - 0.5 deg. C.
    The main technical indicators of asphalt muddy bending testing machine:
    1, relative humidity: less than 85%.
    2, the power supply voltage: 220V
    3, size: 650x480x900mm
    4, flow value size: 0 - 15.00mm precision + 0.1mm
    5, the temperature is not higher than 30 DEG.
    6, the rising speed: (50 + 5) mm/min
    7, power consumption: less than 700W.
    8, maximum pressure: 50KN accuracy of 1%
    9, instrument weight: 100kg
    10, the pressure head diameter: standard beam clamp

    previous_page:The main features and technical indexes of (asphalt test instrument)
    next_page:Far infrared asphalt temperature measuring instrument (asphalt test instrument)

    <ALL>

    Telephone: 
    0086-10-65469689
    Address:Room1928
    Block1,DongyaSanhuan
    Majiapu Road(W),Beijing
     

    京ICP備16005974號-1